How do I make my LC-A's back door interchangeable with the LC-A Instant Back+?
The Lomo LC-A’s original back door and the LC-A Instant Back+ can be replaced within seconds. But why do we have to ready the LC-A to have its back door interchangeable, you ask? Well it’s just a one time minor adjustment that you have to do that will allow you to easily switch the original back door and Instant Back…FOREVER! That’s an infinite number of switching from 35mm film and Instant film!
To make your LC-A’s back door ready for quick interchanging, you’ll just have to go through the following steps:
- Take the Lomo LC-A’s back door and use the pliers to remove the metal pin that holds the door joint.
- Remove the door joint.
- Re-insert the metal pin.
- Now your camera’s back door can be easily attached to the Lomo LC-A and is fully interchangeable with the Lomo LC-A Instant Back+!
After this, you will have to Install the LC-A Instant Back+ to your LC-A camera.
Here is an Instructional video on how to make your original Lomo LC-A back door interchangeable:
This minor operations has been tested countless times by us and Lomography guarantees that you precious Lomo LC-A+ will be fully operational afterwards. Your warranty will fully honoured afterwards! For further questions please contact customer service.
Find out everything about the LC-A+.