Exposing Both Sides of the Film

First trial of EBS. Shot on correct side first in a sunny/bright day, at ISO400(ISO800 film inside). Below half was masked with a splitzer. After finished a roll, reverse the film (in a dark-room). Then start shooting on redscale side in a cloudy/rainy day, at ISO200. Upper half was masked with a splitzer. The order of each location is precisely the same as 1st shots. I took notes in details about locations and shot all places with iPhone, to remember locations. It's tough challenge because I had to wait for the best weather for each shots, and had to be careful with 'gaps' between frames. This is not bad result but I found some mistakes. Have a look at my article about this technique: www.lomography.com/magazine/tipster/2013/01/14/tipster-how-…


  1. kiri-girl
    kiri-girl ·


  2. pixelated
    pixelated ·

    Im in awe... Great photo

  3. stonerfairy
    stonerfairy ·

    Did you return to the same location??! That's tough!!

  4. hodachrome
    hodachrome ·

    That's right. I went to the same places precisely in order as first run. It's necessary to take notes of all the location in order, and I also noted settings (ISO, filter or splitzer) or other matters to be attended to. Needs full of patience and concentration for this project.
    See description about EBS in my first trial album. Thanks!

  5. stonerfairy
    stonerfairy ·

    WOW!! Looking at your photos, i guess you've plan very well! Thanx for the link, I will read it and maybe would try this one day!! Thank you for sharing!
    Have spendid weekend to you!!