Multiple Exposures with the Belair X 6-12


Shooting photos with the Belair X 6-12 is incredibly easy; and so is experimenting with multiple exposures! Read all about it after the jump.

Yes Lomographers, it really is as easy as 1, 2, 3 to take a multiple exposure with the new Belair X 6-12! Just repeat the following simple steps and your good to go!

1. Point your camera at the subject and press the Shutter Release Lever all the way down. It’s a self-cocking shutter design so you don’t need to cock the shutter after each release!

2. DO NOT advance the film and then take your second, third shots… as many as you like really.

3. Advance the film when your work is done.

Told you it was simple!

You can also experiment a little by advancing the film just slightly or half way. That makes two frames overlap one another producing a wider, stunning result like this:

If you want to go all out, you could go for the above technique repeated over a number of times. By looking at the example below, you’ll immediately agree that the outcome is pretty stunning.

*Pre-Order The Belair X 6-12 Now*
Visit the Belair X -12 Product Site

The Belair X 6-12 is available for pre-order until 10th December 2012 (or until stocks run out). By pre-ordering, you can save up to 30% on the launch price – but don’t delay; only limited stocks are available. All pre-order buyers will receive a numbered certificate proving that they are one of the first owners of the camera.

written by webo29 on 2012-10-19 #gear #tutorials #belair-x-6-12 #tipster #mx #doubles #belairx6-12 #features-belair #multiple-exposures-belair

More Interesting Articles