How do I store my film in the LomoKinoScope Film Containers?
When you get your developed LomoKino film back, you can easily store it in one of the LomoKinoScope film containers. Just follow these steps below!
- Remove the top cover of the film container and take out the container spool.
- Take your film and locate the point where your film begins (there should be an exposed blank length) – Then fold the end 90 degrees (around 2 perforations length) and place it into the slit in the middle of the container spool, emulsion side up, following the direction of the arrow.
- Roll the film onto the container spool, then put the spool into the Lomography container. (You may also fold the film end 90 degrees at around 2 perforations length, to avoid the film going completely into the container.)
- Cover the top cover of the film container – It’s now ready to be viewed in the LomoKinoScope Viewer.
Watch the How-To video:
Find out all our tips, tricks and advice on the LomoKino.
written on 2011-10-12 in #accessories #camera #lomokino