Petzval_header_october_2014
Have an account? Login | New to Lomography? Register | Lab | Current Site:

my first diy redscale :)

azel Taken by azel with a Lomo Smena 7 loaded with Agfa 200 film in Saint-Petersburg, Russian Federation. These tags describe this photo: просрочка, mm, 35, expired, смена7, зима, winter, petersburg, diy, redscale, agfa, and smena7. This photo can also be found in the album DIY redscale + smena7.

10 comments

  1. adash

    adash

    This set is waaaay to dark. You should have let more light in, when redscaled the film looses at least two stops of sensitivity.

    almost 2 years ago · report as spam
  2. azel

    azel

    @adash thanks !

    almost 2 years ago · report as spam
  3. adash

    adash

    Some prefer to expose 200ASA redscale as 12ASA, but I haven't tried that. I expose +2 stops (200 becomes 50, 100 becomes 25, etc).

    almost 2 years ago · report as spam
  4. azel

    azel

    @adash i shot at 30asa and f/5.6

    almost 2 years ago · report as spam
  5. adash

    adash

    There is no ASA setting on a Smena. The numbers on top are the speed. Which time of day is that?

    almost 2 years ago · report as spam
  6. azel

    azel

    @adash i shot it at evening

    almost 2 years ago · report as spam
  7. adash

    adash

    Then shoot at F/4 and 1/15 with a steady hand :-D Use B timer and a tripod if unsure - Redscale tolerates much more overexposure than under-exposure.

    almost 2 years ago · report as spam
  8. azel

    azel

    @adash Thank you very much for your advice !)

    almost 2 years ago · report as spam
  9. adash

    adash

    If unsure, overexpose like crazy! Best wishes for the new year!

    almost 2 years ago · report as spam
  10. azel

    azel

    @adash haha :D thank you and happy new year !

    almost 2 years ago · report as spam