Petzval_preorder_header_kit

Now Available for Pre-Order - First Come, First Served

Have an account? Login | New to Lomography? Register | Lab | Current Site:
Exposing Both Sides of the Film

Exposing Both Sides of the Film

First trial of EBS. Shot twice on correct side first, in a sunny/bright day, at ISO400(ISO800 film inside), with a splitzer. After finished a roll, reverse the film (in a dark-room). Then shot twice on redscale side as the same way as 1st run, in a cloudy/rainy day, at ISO200, with a splitzer. It's tough challenge because I had to wait for the best weather for each shots, and had to be careful with 'gaps' between frames. Each 4 images are shot at random in this case. Have a look at my article about this technique: http://www.lomography.com/magazine/tipster/2013/01/14/tipster-how-to-take-symmetrical-images-with-exposing-both-sides-of-the-film-ebs

hodachrome This photo was shot on film. Taken by hodachrome with a Lomo LC-A loaded with Fuji 800 (expired) film in Gifu, Japan. These tags describe this photo: factory, street, ebs, redscale, double, double-exposure, doubles, double exposure, multiple exposure, multiple-exposure, and exposing both sides of the film. Date: 2012-06. Time: Morning. This photo can also be found in the album Exposing Both Sides of the Film.

12 comments

  1. kleeblatt

    kleeblatt

    outstanding !!!

    almost 2 years ago · report as spam
  2. adi_totp

    adi_totp

    *gulp*

    almost 2 years ago · report as spam
  3. srmarcus

    srmarcus

    wuauuuuuuuu

    almost 2 years ago · report as spam
  4. bloomchen

    bloomchen

    fantastic!

    almost 2 years ago · report as spam
  5. allyb

    allyb

    speechless!!! beautiful!!

    almost 2 years ago · report as spam
  6. fisher-price

    fisher-price

    Fantastic!

    almost 2 years ago · report as spam
  7. megaman49

    megaman49

    How did you get the frames to line up? I've been trying to work out in my head how I could pull this off.

    over 1 year ago · report as spam
  8. hodachrome

    hodachrome

    Thanks for the likes!!
    @megaman49
    The alignment of frames is the most important point for EBS. Every time I 'm paying close attention in loading films into LC-A, both normal side and redscale side.
    I will submit an article about EBS soon (in Japanese first and in English later on) . I 'd like you to see it!

    over 1 year ago · report as spam
  9. megaman49

    megaman49

    @hodachrome I'm looking forward to reading it. I don't have a manual 35mm camera yet, so I was trying to work out how to get the camera to wind the film the same both times. I think after I flip the film I am going to cut the leader off and tape it back on after flipping it.

    over 1 year ago · report as spam
  10. hodachrome

    hodachrome

    @megaman49
    You 're right. I usually cut off the leader (for a start). Tape it with spool and do the same on both sides. You 'd better mark the cog position, or record with digital camera. It will help you to load precisely.

    over 1 year ago · report as spam
  11. magicaaron

    magicaaron

    I wish I could like it countless times, your EBSs' are just too inspiring!!
    over 1 year ago · report as spam
  12. kaardevries

    kaardevries

    this whole album is just stunning!

    over 1 year ago · report as spam

Where is this?

Nearby popular photos – see more