If your LC-A’s leather skin is starting to look tattered, it’s sort of telling you it's time to replace it. Follow this simple tipster on how to make your beloved LC-A look new(ish) again.
I liked how it looked but it lacked a leathery feel so I decided to replace the skin with leatherette. And it’s really easy to do! I’ll show you how.
What you need:
- Leatherette (or leather)
- Cutter or scissors
- Rubber-based adhesive
- A screwdriver
Unscrew the cover of your LC-A and peel out the old skin.
Cut out your leather/leatherette. You can base it on your LC-A’s old skin (tracing it out works, too.)
You’ll end up with these three pieces.
Apply glue on the leatherette and spread it evenly. I used contact cement here. Set aside the leatherette and apply glue on your camera as well.
Now, stick the leatherette onto your LC-A. Make sure to smooth it out and don’t forget to press on the edges so it would look neat and evenly stick to the surface.
Put the cover back on and do the same procedure for the back part of your camera.
Let it dry. If you’re using contact cement, it will take overnight to dry fully.
Another tip: You can also use materials other than leatherette and leather! My previous skin was actually just a decal.
Enjoy your “new” LC-A!
The Lomo LC-A is the camera that started the Lomography movement. With full controls and wide ISO range, this automatic gem is perfect for beginners and professionals alike. Get your own Refurbished LC-A in our Shop!