Lomoinstant_en
Have an account? Login | New to Lomography? Register | Lab | Current Site:

Making a 3D Printed 4x5 Inch Pinhole Camera

With all of the innovations 3d printing comes up day after day, it was only a matter of time before we had a working analogue camera available! Check it out after the jump!

Photo from thingiverse

We’ve got 3D printed bicycles, dresses, guns, and even a replica Aston Martin. It should come to no surprise that a camera will be available as well. It might take a while to design one with intricate parts however, so we’ll have to stick with the basics – pinholes!

For this project, all you need is a 4×5 film holder (widely available in photo shops and evilbay) and of course, a 3D printer. You just need to download the file, print, and follow the instructions.

Let us know how it turns out for you!

Photo from thingiverse

Information for this article was sourced from thingiverse

written by cruzron

1 comment

  1. schlem

    Here's a link to the first batch of photographs from this camera: http://www.flickr.com/photos/theschlem/sets/72157635640450384/
    about 1 year ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: Deutsch & Français.