This is your last chance to pre-order your Petzval Lens and get the special aperture plates included for free! With estimated delivery in August (or even sooner), don’t miss out on securing your picture perfect portrait lens!

Have an account? Login | New to Lomography? Register | Lab | Current Site:

Pinhole Passion: A Chewing Gum Box Pinhole Camera

To celebrate this year's World Pinhole Photography Day, I've been making pinhole cameras in all the film formats I'm familiar with: 110, 120, instant film...and of course, 35mm!

Today, while I was drinking my umpteenth soda of the day, I felt like a chewing gum. With the chewing gum box in one hand and a can in the other, I had the epiphany: tiny box + aluminum = pinhole camera!

To make this revelation turn into a pinhole camera I used the afore-mentioned chewing gum box and can, black insulating tape, normal tape, a pencil, a marker, a pin, scissors and two rolls of 35mm film (an empty one and a “fresh” one).

First, I decided where my film would pass through the box. I marked two parallel lines on the front (representing very approximately the film) and one per side, as tall as the film cartridge.

Back to the front, I marked (again, with my distinctive scientific precision) the center of the “film path.” I cut a small rectangular window there and taped a little piece of tin foil (cut out from the soda can) that I had pierced right in its center with the tip of a pin.

I then cut along the two lateral lines to make the slits through which film would get through the “camera.” I used a pen to crack the slits a little more in order to make it easier to insert the cartridge’s edge.

I mentioned you need two rolls of film. Actually, you only need one, the other one can be an empty cartridge, as the one I used. It is so wrecked because lately I’ve started developing film at home but have yet to master how to pull film out of the cartridge. Anyway, it doesn’t really matter if your empty cartridge looks as bad as mine as long as you can still turn the spool, as you will have to tape about every inch of it soon.

Now it was time to put the film in my soon-to-be pinhole camera. Here you have two options:

1. Shooting the film the good old way and get normal pictures:

2. Shooting the film the other way and get redscale pictures:

As it’s been a while since the last time I shot some redscale film, I decided to go for the redscale. I inserted the film slotting the cartridge in into the chewing gum box and made the film go all the way through the other slit. I used black tape to hold everything still and to prevent light from leaking in.

I then taped the fresh film to the last bit still coming out from the old cartridge’s spool, winding it a bit to make sure the film inside was well stretched.

Next I covered the old cartridge and most of the box as well, except for the top of the cartridges (so that I could still advance/rewind the film) and the pinhole.

I made my shutter folding on itself a piece of tape as long as the chewing gum box, leaving a sticky part on top, which I then glued to the top of my camera, adding another piece of tape (the red one) on the bottom to keep the shutter closed. To open it and take a picture, all I have to do is lifting the long black tape.

I added some more red tape on the top to keep the shutter closed better…and some more on the sides, just because.

To advance the film, I put a paper clip in the top of the old roll’s cartridge, making two full turns to advance to the next frame. I’ve read somewhere that one turn and a half is enough, but I personally prefer to make two whole turns.

Also, I keep by my side this helpful exposure guide which comes with the Diana Multi Pinhole Operator to help me determine exposure times:

So here’s another toy for me to try out on April 28th, World Pinhole Photography Day!
I will share my pictures as soon as I get the roll developed on my blog. Feel free to come say hi and check out my other pinhole projects!

Editor’s Note: Dear bunnyears, don’t forget to tell us about your pinhole experiment as well!

written by bunnyears

2 comments

  1. stonerfairy

    stonerfairy

    CREATIVE is the word!

    about 1 year ago · report as spam
  2. bunnyears

    bunnyears

    thank you very much! :-) @stonerfairy

    about 1 year ago · report as spam