Have an account? Login | New to Lomography? Register | Lab | Current Site:

5 Top Tips For Shooting With The Belair X 6-12

If you’ve pre-ordered your Belair X 6-12, we’re sure you can’t wait to get it in your hands and start shooting with it! To help make those first few rolls turn out as amazing as they can be, we’ve put together 5 tips to bear in mind when shooting with your Belair.

All about Film Sensitivity (ISO/ASA) and Auto Exposure Range

The Belair X 6-12 is an auto-exposure camera. This means that just like with the Lomo LC-A, you will need to set the correct film sensitivity so that photos turn out neither dark, nor overexposed. Whilst the Lomo LC-A shutter closes only once there is enough light, the Belair X 6-12’s auto-exposure range is EV4 – EV15 and this is calculated just before the shutter is released.

In Auto Exposure Mode, the Belair X 6-12 will expose correctly according to the ISO selected. The ISO/ASA dial is located behind the lens board, under the battery chamber. Select and turn the ISO Dial so that it matches the ISO of the film you are using.

The minimum recommended conditions when shooting in dim light with the Belair X 6-12 are ISO/ASA dial set to 100 with 100ISO film. If you’re after brighter results in a dark setting we recommend using a high ISO film or switching to B (Bulb) Mode. B Mode will expose your shot for as long as you keep the shutter pressed.

Setting the Focus

There are 4 focusing zones on the Belair X 6-12 90mm lens: 1m, 1.5m, 3m and infinity. Set the focus by turning the lens focusing ring according to the distance of your subject. Use these depth of field charts to help you achieve just the right exposure depending on the distance from your subject.

Unfolding the Camera and Inserting Batteries

Before heading out, unfold the Belair X 6-12 by pressing the folding lock at the bottom of the camera, hold and pull out the lens board until it locks into place.

Insert 2 × 1.5V (2 x LR44) batteries in the battery chamber on the top of the lens board; take care to match them with the indicators. Flip back and close the battery chamber.

Holding the Camera Properly

When shooting, always make sure you are holding the front part of the camera on the shutter release side. Remember the light meter is on the front left hand side of the camera, so you want to keep that unobstructed at all times. Whether you choose to hold your Belair X 6-12 with one or both hands, you ought to keep in mind that the way you take your pictures does not make your camera shake. Find out more

Shooting in Panoramic Format without Overlapping

Since the exposure area of 6×12 is a double a 6×6, you need to stop at frame 2, 4, 6, 8, 10 and 12 when looking though the red frame window. If you stop at other frames, you’ll end up with overlapping exposures.

Belair X 6-12 FAQs

The FAQ section might already have the answer to queries you might have. Alternatively, you are very welcome to contact Lomography Customer Service – they’re there to help!

written by tomas_bates

11 comments

  1. bloomchen

    bloomchen

    OK. and i was wondering why the cam was still exposing when using a flash and figuring out how the lightmeter works.

    over 1 year ago · report as spam
  2. neanderthalis

    neanderthalis

    I found this very informative and really want one now.

    over 1 year ago · report as spam
  3. vicuna

    vicuna

    can't wait to receive mine! :)

    over 1 year ago · report as spam
  4. tomas_bates

    tomas_bates

    @vicuna - can't wait to see your shots with it :-)

    over 1 year ago · report as spam
  5. vicuna

    vicuna

    @tomas_bates: ha ha, be sure that as soon as I have it in my hands I will shoot some test rolls! :)

    over 1 year ago · report as spam
  6. placidcasua1

    placidcasua1

    Mine is for sale on Ebay. Need cash for Christmas...

    over 1 year ago · report as spam
  7. adam_g2000

    adam_g2000

    @placidcasua1 did you not like it?

    over 1 year ago · report as spam
  8. placidcasua1

    placidcasua1

    It's ok, but I don't have the patience to experiment with it (and could do with the cash).

    over 1 year ago · report as spam
  9. leolensen

    leolensen

    @bloomchen I had that problem too with my test shots (at a lgs party), they told me to set a higher ISO when using flash... dunno if that's gonna help much or enough

    over 1 year ago · report as spam
  10. jeffr

    jeffr

    how will you know when the batteries are low or dead? will you have to wait till you wind up with a badly exposed roll to realize the batteries are low/dead?

    over 1 year ago · report as spam
  11. idmism

    idmism

    any1 knows if it is possible to mount any filters / step-up ring on Belair

    11 months ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: Deutsch, Nederlands, Spanish, 日本語, ภาษาไทย & 한국어.