Black_friday_en
Have an account? Login | New to Lomography? Register | Lab | Current Site:

Changing Lenses on the Diana Baby 110

As you might have heard, the Diana Baby 110 comes with a set of interchangeable lenses. Read on find out how to make the switch between the 12 and 24mm lenses (or vice versa of course)

To change from one lense to another on your Diana Baby 110, simply hold the lens firmly and make a small anti-clockwise twist from the lower white dot to upper white dot on the side. This releases the lens.
To attach the lens, just repeat the process in reverse. Place the lens white dot aligned with the upper white dot on the camera and then twist clockwise until you reach the lower white dot. This attaches the lens to the camera body.

Want to switch lenses halfway through a roll? You can do that too! You can shoot 1 photo with the 24mm lens and then swap to the 12mm wide-angle lens for the next photo. If you’d like to switch lenses whilst using the same film cartridge, just make sure the shutter is on the ‘N’ (Normal’) setting; this ensures that no light will get to the film whilst you are changing the lens.

Lomography proudly presents the Diana Baby 110, the second member of the Lomography 110 Camera Family. Easy to use and packed with creative features, with this tiny camera you can choose between two interchangeable lenses; shoot breathtaking wide-angle shots with the 12mm lens or switch to the 24mm lens for standard square photos. Read more on the 110 Camera Microsite

written by webo29

No comments yet, be the first

Read this article in another language

This is the original article written in: English. It is also available in: 日本語, Türkçe, Spanish, Deutsch, Italiano & ภาษาไทย.