The World’s Most Creative Instant Camera: Now Available For Pre-Order

Header
Have an account? Login | New to Lomography? Register | Lab | Current Site:

New Possibilities For Disposable Cameras

Are you wondering if that disposable camera is worth keeping? The answer is yes! This tutorial shows you how to recover the film inside.

After returning home from another year at college, I began cleaning out my room and stumbled upon a few expired Fuji Quicksnap 400 cameras.

The way that a disposable camera works is very similar to a normal 35mm camera, but since it’s a one-time use camera, all the film is out of the spool inside the camera. As you take your snapshots and wind the dial to the next picture, you’re actually winding the film back up inside the 35mm spool.

The first order of business is to get that film back inside the spool! I used a light safe bag and went into a dimly lit room and took the pictures inside the bag.

There were 27 exposures on this camera. A quick way to wind it back up is to hold down the shutter button and keep winding with your thumb. Wind the camera until it’s between the 1 and the 0.

An important note is to remember to wind it past the 1 on the top dial, but not all the way to the 0. Between 1 and 0 gives you an appropriate amount of film lead to roll into your next camera for later use; At the 1 leaves too much and at the 0 winds it all up into the spool.

If you want to get crazy with double exposures go ahead and take the pictures in the camera instead of winding it all at once. Be sure to post your results!

Next comes the fun part! Remove the paper cover from the camera and flip it upside down. Open the bottom flap and remove the battery (usually a AAA).

Before breaking it apart, it’s important to know where your film is. In the picture below, the spool of 35mm is on the left side. Underneath my thumb is a few inches rolled up outside the spool.

Now it’s just a matter of breaking it apart! It’s not impossible to do it by hand, but if you have a hammer and a screwdriver it’s a lot easier. I put mine in a vice and gave it a few good whacks on one of the seams of the plastic casing. As you break chunks off, a shiny roll of film appears!

And there you have it! Pull out the spool of film and wind the few inches left manually leaving the usual film leader. Pop that bad boy in the fridge until your next adventure!

It’s also kind of cool to see how the camera works! If it’s not completely destroyed, you can still explore and see what’s inside.

written by original_j2

4 comments

  1. iamtheju

    iamtheju

    I would value the camera more than the film. I think it would be more interesting to convert a single use camera into a normal camera. although I imagine it may be a little hard.
    Good tipster though, i'm sure it will help people :))

    about 2 years ago · report as spam
  2. zanardi

    zanardi

    tipster is useless, if you have a camera use it and not destroy it! (sorry for my bad english)

    about 2 years ago · report as spam
  3. zanardi

    zanardi

    tipster is useless, if you have a camera use it and not destroy it! (sorry for my bad english)

    about 2 years ago · report as spam
  4. thejunkman

    thejunkman

    some throw aways can be reused. Once you remove the paper you'll notice a release that allows you to open the back on the camera and remove/reload a new roll. They all pretty much operate the same way, you wind the film back into the cartridge as you take a picture and advance to the next frame. Throw aways can be gutted for parts if you want to make a pinhole camera, some even come with small plastic film containers inside that would be perfect for custom pinhole making.

    about 2 years ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: Deutsch & Italiano.