Have an account? Login | New to Lomography? Register | Lab | Current Site:

Using Redscale Films: Experiment with the ISO

If you are new to redscale film or not really experimented with it, this is a great tipster, experiment with the ISO of the Redscale XR, to see which colours you like best, unless like me you can't decide!

If you are new to using redscale, especially the Lomography XR Redscale, I think the best tip I can give you is experiment with the ISO rating on you camera. The ISO rating of this film is 50-200, and changing the rating on our camera can give you completely different results. If you like the intense reds and oranges then you would want to set your ISO to 200, if you prefer the more subtle colours with a bit more blue and green tones, you want a lower ISO nearer 50.

But I suggest at least for the first roll if you have a camera in which you can change the ISO, to take one photo, change the ISO and then take another photo similar to the first. This way when the photos are developed, you can see how changing the ISO gives you different results and how it effects the film. I have done this both in a LC-A+ and an Olympus XA2 and they have worked well, I am sure there are other cameras you can try. Of course you can also set the ISO to anywhere inbetween these settings.

On the following examples, the lower ISO is first, the higher ISO second.

I can never decide which effect I prefer so that’s why I tend to like to change it around throughout the film. Why not have a go yourself and see what you prefer?

Load up the Lomography Redscale 100 35mm film and achieve the warm-tinged effect produced only by exposing the negative on the reverse side! You’ll get breathtaking square shots evoking intensely warm, honey hues. See our selection of Lomography films here.

written by rosebud82

6 comments

  1. deprofundis

    deprofundis

    I need to remember this ^_^

    almost 3 years ago · report as spam
  2. mrmostarr

    mrmostarr

    the poppy field is amazing

    almost 3 years ago · report as spam
  3. istra

    istra

    nice tipster! I agree it's hard to decide which looks better, both iso levels look great though!

    almost 3 years ago · report as spam
  4. reginachew

    i got a question.. i tried my very first Lomography Red Scale Film. but when i developed the photos, all the photos are mirrored! i dint noticed it until i saw the words on signboard are mirrored! is this scenario normal to all red scale film?

    almost 3 years ago · report as spam
  5. superkulisap

    superkulisap

    @reginachew I think you need to scan the other side of the film.

    almost 3 years ago · report as spam
  6. reginachew

    okie, thx @superkulisap! =)

    almost 3 years ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: Deutsch, Československy & Português.