Have an account? Login | New to Lomography? Register | Lab | Current Site:

A Beginner's Guide to Tilt Shift Photography Part 2

If you want some crazy tilt to your photography you have two choices - spend a fortune on an expensive professional lens or build your own. It's easy, honest!

First things first – what do you need to build your own lens?

1) A camera body with TTL (through the lens) viewing. You’re going to need to able to see exactly what the lens sees, so you can see what’s in focus and what isn’t. An old slr is ideal…and it needs to be able to focus manually, because you’re not building an autofocus lens!!! I’m using my Minolta Dynax 5, but any manual focus SLR will do just as well.

2) Some sort of lens. For this to work properly the lens should be for a larger format than the camera you’re going to use. This is because a 35mm lens projects an image exactly the same size as a 35mm negative. As you tilt and wiggle the lens about some of the image will fall outside the negative and some of the negative with be blank. A larger format lens projects a larger image, so you can move it about and still cover your whole negative.

So for our 35mm slr, a medium format lens would be perfect or you can do what I did and buy a cheap enlarger lens from ebay. (I haven’t tried using Diana or Holga lenses but you could give that a go.) A long focal length is better too, especially if you want to try the miniature world stuff, I’ve heard that it has to be longer than 50mm. Mine is 75mm.

3) Some way of fixing the lens to the camera body – for a good secure fit some kind of lens adapter/extension tube is really helpful as it locks into your lens mount and tells the camera that there’s a lens attached. I used a set of extension tubes designed for macro photography. They’re cheap to buy, they come in all lens mount fittings and consist of four or five rings that screw together, you’ll probably only need the bit that attaches to the camera body and maybe one extra ring to give your lens a bit of stability.

4) Something flexible to allow you to tilt. I’ve seem pictures of lenses using rubber plungers or thick plastic sheeting. My first attempt was made from a vinyl pouch that had contained headphones, the current model uses a piece of bicycle inner tube. It just has to be black, light tight and bendy.

5) Fixing agents – for me, electrical tape and plastic ties.

How you do it.
First of all, you have to make sure that your lens is capable of focusing, which means making sure that you have it the right distance away from the film in your camera. So, set your slr to manual focus, take the lens off and hold the lens you’re going to use in front of the camera, moving it back and forwards slightly until you get a focused image. This is where the lens needs to be relative to the camera, so this distance is going to be the finished length of your lens. Obviously, unlike a normal lens, you will be able to move your lens back and forwards, so it doesn’t need to be inch perfect, just more or less in the right position. Then cut your bicycle inner tube/ black vinyl etc to a slightly longer length (you need to overlap on the lens and on the adapter, but remember that you have to include the length of the adapter in the overall lens length.)

Then you have to connect the lens and the adaptor. So take your slice of inner tube stretch it over the adaptor. I found that as it was harder to stretch the rubber over the adaptor, it was best to do that first. Once it’s on (and yes, you’ll have done quite a lot of swearing and this point and it would have helped if you had eight hands to do it) fix it with electrical tape, and heave a sigh of relief.

The lens is smaller and so this bit is easier – before you start, open the aperture dial as wide as possible, then pull the inner tube round the lens. Try and leave the aperture dial free of rubber so you can adjust the aperture if you need to, most of the time you’ll be shoot with it as open as possible though.

Again, fix it with electrical tape. Then put it on your camera and check that you can get a clear, focused image. If you can’t, the lens fitting is too short or too long and you have to cut another piece of inner tube and try again. Once it’s right, secure it with cable ties over the electrical tape on both ends (lens and adapter). I find that I use the little plastic nubs of the cable ties to manipulate the lens, so if you can fit four at north, east, south and west of the lens end you’ll get good control of the tilting effect.

All you have to do now is put the whole assembly on your camera….

…and get out there and start tilting. You’re lomographers, so I don’t have to tell you what to do. Do whatever you want!

written by kvboyle

20 comments

  1. mcrstar

    mcrstar

    awesome

    over 3 years ago · report as spam
  2. vicuna

    vicuna

    Fantastic Tipster!!! As I have the Diana SLR adapter, I should try this with the Diana lenses on my SLR...

    over 3 years ago · report as spam
  3. natalieerachel

    natalieerachel

    So cool!! Where did you get the bendy/tilty inner tube??

    over 3 years ago · report as spam
  4. juxtimon

    juxtimon

    photo #6 is incredible! one of my favourite lomographs in ages

    over 3 years ago · report as spam
  5. nicolas_noir

    nicolas_noir

    I tried this with my 38mm Diana lens I think and Canon adaptor, but more in a free lens style.

    Great walk through and great shots!

    over 3 years ago · report as spam
  6. duckduckninja

    duckduckninja

    Great design, I've just been holding a lens in front of the camera.

    over 3 years ago · report as spam
  7. boredbone

    boredbone

    omg! this is awesome. @vicuna that's a cool idea too.

    over 3 years ago · report as spam
  8. itsdebraanne

    itsdebraanne

    love!!

    over 3 years ago · report as spam
  9. takeaphotoitlllastlonger

    takeaphotoitlllastlonger

    here's a link to the dude whom imo has perfected this (John Swierzbin): http://cow.mooh.org/(…)amples.html
    great article!
    been meaning to try this out for ages. just haven't had the time to try it!

    over 3 years ago · report as spam
  10. fash_on

    fash_on

    Check out the photos of Vincent La Foret...http://tinyurl.com/4sk5v5n

    over 3 years ago · report as spam
  11. fash_on

    fash_on

    sorry about the bad link http://tinyurl.com/4sk5v5n

    over 3 years ago · report as spam
  12. gm_mcleod

    gm_mcleod

    amazing!! wish I had the right camera to try it, maybe some day.

    over 3 years ago · report as spam
  13. ourworldmyeye

    ourworldmyeye

    Sweet - nice results and simple build too. I recently made one with someone and we used a section of a plumbers plunger...we had mixed results! Your system is much easier though! If you want inspiration into the world of Tilt Shift...you can't go far wrong with Alejandro Chaskielberg - his work is amazing. He showed as part of the Photo Fringe here in Brighton late last year and it blew me away. More info here: http://www.ourworldmyeye.com/photography/brighton-photo-biennial-fringe-2010-reviews-part-2/
    over 3 years ago · report as spam
  14. gfiftyfive

    gfiftyfive

    Brilliant! I have several old cameras sitting around, begging for a new lease on life. :) Thanks!
    over 3 years ago · report as spam
  15. stouf

    stouf

    HOOOOOOOOOOOOOOOO !!!! I WANT I WANT I WANT !!! Tipster of the year from me. That's it.

    over 3 years ago · report as spam
  16. koalasve

    koalasve

    <3

    over 3 years ago · report as spam
  17. gvelasco

    gvelasco

    Amazing.

    over 3 years ago · report as spam
  18. veato

    veato

    Brilliant tipster. I love tilt/shift and the "model village" effect that can be created but could never justify the cost of the lens. Now though I'm seriously considering this!

    over 3 years ago · report as spam
  19. sandkorn

    sandkorn

    brilliant tipster! and great photos, have to try it one day...

    over 3 years ago · report as spam
  20. amogh

    amogh

    this is brilliant!

    over 3 years ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: Spanish & Italiano.