Now Available for Pre-Order - First Come, First Served

Have an account? Login | New to Lomography? Register | Lab | Current Site:

Slicing your Lomography Spinner 360° Images for Wonderful Large Prints

Read the step-by-step tipster on how to slice your Lomography Spinner 360° images for wonderful large prints. The result: a huge fantastic print of your favourite Spinner 360° image to hang on your wall!

Follow the steps in this guide for knowing how to slice your Lomography Spinner 360° images. As soon as you have your files ready you can print out each image separately and then put the whole picture together like a puzzle. The result: a huge fantastic print of your favourite Spinner 360° image to hang on your wall!

1. Open your Spinner 360° image in Photoshop. Make sure you have it scanned in a large enough resolution that allows crystal sharp prints. We recommend to scan your images in a resolution of 1200 dpi.

2. Set the image size to the height of the single sliced prints. Make sure to “Constrain Proportions” and NOT to “Resample Image” (so the pixel dimensions will stay the same).

For all methods of slicing and printing your Spinner 360° image it’s advisable to first find out about the print sizes your lab has to offer. Usually you will be given sizes like 10×15cm / 4×6″ or 13×18cm/5×7”. As soon as you sliced your images into several parts you can choose the size you want your individual prints to be.

3. Set the canvas size. You just need to adjust the width, which should be a multiple of a single print size. If you increase the width you will get blank areas left and right which you can cut away when the prints arrive (in this example the “Anchor” is moved, so the blank area is just on one side). You could also decrease the width, causing parts of the image being cut off.

In this case the Spinner 360° shot would be 3 prints long (each 15,2 cm long). Keep in mind that the ratio of landscape prints is 1:3. If you want to make it even bigger, multiply. You can slice your image in 2×6 prints, 3×9 prints and so on. No matter what you choose, the basic file to use is what you just created.

4. Insert “Guides” to make the perfect cuts. Each “Guide” is exactly positioned where a separate image needs to be cut. For example, when using 10×15cm prints the first “Guide” is placed at 15cm and the second at 30cm.

5. Select the first individual part (left image), copy it and paste it in a new file. The image should now have the right size and is ready to be printed!

6. But what if you want to divide a Spinner 360° image into more than just 3 pieces? Just create more “Guides” at the right positions. Start with the height. Just use half of the single print size (in this case 5,1cm; horizontal) for a “Guide” that cuts the height in two. Do the same for the width and use this number as new base for the “Guides” (example: 7,6cm / 15,2cm / 22,8cm / etc.)

7. Save all the images in a folder and send them to print in your favourite lab, drug store or mail order.

8. Wait a few days, get your prints back and jump in the air shouting “yipiyalahohospinspallahey”. Now put your prints in order and choose the method you want to assemble them. You can use Lomography Fotoclips to clip `em together, you can use adhesive panels to assemble them (like when doing a LomoWall) or invent any other method that keeps those prints stuck together.

9. Voilà! Your Spinner 360° image now exists in all its beauty in the real world!

written by plainjane


  1. nural


    I wanna try this!

    almost 4 years ago · report as spam
  2. mandi


    slicing is fun!

    almost 4 years ago · report as spam
  3. trash-gordon-from-outer-space


    That looks great!

    almost 4 years ago · report as spam
  4. majorted


    very, very neat idea guys!

    almost 4 years ago · report as spam
  5. lez


    Can't wait to get my hands on a Spinner!!
    almost 4 years ago · report as spam
  6. eva_eva


    this is so cool!

    almost 4 years ago · report as spam
  7. kvboyle


    Great idea, and not just for spinner shots.....

    almost 4 years ago · report as spam
  8. bcpintw

    Can anyone recommend an alternative to photoshop? One that can also slice the photos. Preferably free...
    over 3 years ago · report as spam
  9. itsdebraanne


    this makes me want a spinner 360 more and more. i also want a sprocket rocket! grrr

    about 3 years ago · report as spam
  10. lime121

    It is something I was looking for from days. I have a very good collection of a trip photographs. I was planning to get it done for my new homes wall. Just trying to find the styles and found this wonderful article. Hope it will be a real fun playing with these photographs. My trick will be in my wall very soon. People will die after seeing this wonderful effort. Thank you so much for this. @ <a href="">hh gregg</a>
    about 3 years ago · report as spam
  11. dooby


    awesome tipster, works a charm on Photoshop! cheers o)-<):

    over 2 years ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: 中文(繁體版), 日本語, 한국어, Deutsch & Русский.