Have an account? Login | New to Lomography? Register | Lab | Current Site:

Tripod Holga

Keeping it steady and clean with the Holga has never been this easy! Will save you a lot of bucks too if you're on a tighter budget, so getting rid of those blurs can now be achieved with this simple to do modification I am about to share!

For more sharpness and pinhole use, try the ‘Tripod Holga’!

You will need 3 things:

  • some super glue
  • a 1/4″×20 nut
  • the Holga camera

Place the nut in the glue. After A few hours, give the nut a second time of glue. Let it dry for 24 hours, and now you can mount it on your tripod!

written by goldhammer

No comments yet, be the first

Read this article in another language

This is the original article written in: English. It is also available in: Deutsch.