Lca_120_september_2014_header
Have an account? Login | New to Lomography? Register | Lab | Current Site:

Tipster of the Week: The Other Side of Things

Just as would black exists to bring out the white and vice-versa, it's amazing how seeing things by exploring their two dimensions can really reveal more than what we're judging on the surface. As we all know, there are always two sides in every story and both are exposed by our Tipster of the week!

Anti-Ghosting Maneuver, Activate! by lomo-camkage

I want to talk about exposing yourself multiple times! Sure you can do it or your friends can do it. It takes little effort. What we want to do is contain the ghosts we normally get when we do multiple exposures. We want the subject to be a solid image in both sections of the photo. Here are my experimental method.

As always, I encourage improvisation, but here are the things you need:

  • A camera that allows multiple exposures while on a tripod (i.e., Holga, Diana F+, Smena 8M, etc.)
  • A Tripod or anything that will ensure the camera won’t move between exposures.
  • A cable release or other way of holding the shutter open without moving the camera.
  • A powerful light with a focused beam. Keep in mind that choosing an LED/Incandescent Bulb/Tungsten light will alter the shots color. Play with it.
  • A Dark environment. Practically devoid of all ambient lighting. Basically, the darker the better.

Now, the whole point of this exercise is to prevent the usual ghosting you get with multiple exposures in well lit situations. We are trying to get there to really be two or more of the subject you are shooting. So the darkness helps prevent that as well as the narrow beam light.

Set up in your darkened location:

Give yourself about 4 1/2 feet to 9 ft to shoot this. More if your light is powerful enough. You can also get closer to subjects to light them, but I’ll get into that later. By now you probably have an idea about how this will work. Pick your subject and background. set your focus for the first exposure and have them take position.

Procedure:
Using your cable release, open the shutter while it is still dark. Then, you will point the light at your subject from whatever direction you feel works for the shot.

Now, when you turn on your light, your goal is to only light them and not too much of the environment around them. That is, if they are going to do a 2nd pose close to their original. If the subject will be far from their original position, then paint the area around them with as much illumination as you want. Just don’t overlap the place where the subject will be standing.

Paint your subject with light. You are really doing slow sweeping gestures. It shouldn’t take more than 3-5 sec to cover your subject. More than that will cause your shot to get blown out. There may be times where you want to blow out a few sections of your model but light the rest correctly. Play with this and see what you come up with.

Once they have stood in their first position, you can either turn off the light and have them reposition, or if it is a more complex setup for a 2nd shot, close the shutter.

Once you have the second pose setup, you can re-open the shutter or turn the light back on if you never closed it. On your second round of lighting the shot, try not to cover the area the subject was standing in previousy. Also, if you lit the surrounding environment well in the first shot, then go easy the next round.

Remember, the less light around the position where the model is going to stand or stood, the better. This prevents Ghosting.

That is the basic gist of things. Experiment with having someone light your subject from close up but they should stay out of the light’s “sphere of influence”. Light only partial areas of a living room environment or forest scene. These changes can drastically alter the mood of the shot. Also, use different lights for the same shot or cover them with gels for different effects and moods. There are a lot of clever combinations you can do.

For these examples I was using a Holga, as they are so easy to use for multiple exposures. Just keep clicking away. I was using a LED Shop light for the lighting, except for the shot of Rickey in the tree. That is extra dark because I only had the Lomo Ringflash on me.

I hope you found this helpful or fun or exciting. I always like to tap into other people’s ideas and start bending them to my will. Get out there and start snapping shutters!

written by lomo-camkage

10 comments

  1. leela_dark

    leela_dark

    Thanx for the supercool tipster, amazing gallery! I have to try this...

    over 4 years ago · report as spam
  2. stouf

    stouf

    Very nice ! Super detailed technique !

    over 4 years ago · report as spam
  3. satomi

    satomi

    looks like you had a lot of fun doing this...#6 is specially funny!

    over 4 years ago · report as spam
  4. born-to-ruin

    born-to-ruin

    Great tip! 5 and 6 are brilliant!

    over 4 years ago · report as spam
  5. drehoh177

    drehoh177

    Wow, this is great! thanks for the awesome tipster

    over 4 years ago · report as spam
  6. little_porcelain

    little_porcelain

    Really great gallery!!! I have a Smena 35, must try it ! :)

    over 4 years ago · report as spam
  7. kylethefrench

    kylethefrench

    yeah totally, the black sheet is king

    over 4 years ago · report as spam
  8. microfil

    microfil

    Fantastic technique!!!! Thank you very much!!! =) Amazing!!!

    over 4 years ago · report as spam
  9. blackstar888

    blackstar888

    sweeeeet!

    over 4 years ago · report as spam
  10. xbluemindx

    xbluemindx

    great tipster! :)

    over 4 years ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: 中文(繁體版).