Lca_120_september_2014_header
Have an account? Login | New to Lomography? Register | Lab | Current Site:

DigitaLIZA 35mm Scanning Mask: Absolutely Essential

I have recently acquired the DigitaLIZA 135 scanning mask and I couldn't be happier with it. Despite already having a 35mm scanning mask, the advantages of the DigitaLIZA make it essential if you want to scan your negatives. The DigitaLIZA mask is, simply, essential.

The scanner I have (Epson 1670) comes with a mask, but it presents many drawbacks that the DigitaLIZA solves:

  • It doesn’t let you scan the sprocket holes. The mask hold the film firmly by the sprocket holes, preventing them from being scanned.
  • It doesn’t let you scan panoramic images (let alone super-panoramics).
  • Somewhat slow and complex when putting the negative into the mask. It is very flimsy and the negatives bend and deteriorate often.

With the DigitaLIZA 35mm, all these problems disappear and scanning negatives becomes a fantastic, comfortable and fast experience.

The operation of the DigitaLIZA is simple. We just have to put the mask on the metal plate and put the negative inside. Then we put on the cover (fitting the 4 indicators) and we close the mask completely. Lastly, we take off the cover and the plate. In this way, we obtain a negative perfectly fit inside the mask, that shows all its extension and allowing a complete scan of the film, including the sprocket holes. I should mention that the DigitaLIZA mask is compatible with all flatbed backlight scanners on the market, even though I recommend Epson because of their reliability and quality.

The scanning area is quite large (230 mm x 33 mm), which allows scanning of panoramic images. Also, the distance between the film and the scanner bed is just 1.2 mm, preventing the appearance of the annoying “Newton Rings”.

Without doubt, it’s one of the best investments you can make. The advantages of scanning your own negatives are many, specially that you have total control over the end results and the huge economical saving it entails. We also have to take into account that not all labs offer scanning service. Also, if you want to get the DigitaLIZA 135 and DigitaLIZA 120 pack, you will receive an important discount. You can also buy the DigitaLIZA in a pack with certain cameras, getting another considerable discount. Check out the saving packs at the Lomography Online Store

The DigitaLIZA 35mm Scanning Mask holds your 35mm negatives in place so you can scan them, sprocket holes and all! Be your own boss when it comes to scanning 35mm negatives, giving you ultimate control over your images! Visit the Shop and get your very own DigitaLIZA 35mm Scanning Mask.

written by jesushp and translated by etxenike

4 comments

  1. saidseni

    saidseni

    I totally agree with you, I rather use it than the Epson V500 mask, it's much easier to put the film in so I'm now using it even if I don't need to scan sprockets. There is only one disadvantage to me: it's hard to put it in a completely straight position in the flatbed but I think it can be easily solved using some objects, I'm working on a solution...

    about 3 years ago · report as spam
  2. ripsta

    ripsta

    im using CanoScan 9000F,can digitaliza scan horizon and sprocket hole?

    about 3 years ago · report as spam
  3. plastic_diana

    plastic_diana

    i just got the canoscan 8800F and bought also the digitaliza for 35mm and 120 mm film. I got no problems with the 120 mask, but somehow i cant scan my 35mm film. since the digitaliza is smaller than the orginal mask from canon i have to somehow guess where to put it. and the pictures always tend to be kinda blueish (not blue from the film or anything but because it isnt scanned the right way)... and it doesnt get both , the top and bottom, sprocket holes. just one in a time... :S any tipps?

    about 3 years ago · report as spam
  4. etxenike

    etxenike

    @saidseni I have the same scanner and the DigitaLIZA 120. I don't know if it has the same size of the 35mm version, but I just put mine against the front of the scanner. I just have to turn it around for the last picture, since the scan doesn't go all the way down.

    about 3 years ago · report as spam

Read this article in another language

The original version of this article is written in: Spanish.