Lca_120_september_2014_header
Have an account? Login | New to Lomography? Register | Lab | Current Site:

Tunnel Vision Lens

The tunnel vision lens is my favorite accessory. It is always attached to my LC-A+. And it will not only broaden your photographic horizon, but also add a soulful blur to your images.

My Tunnel Vision Lens is always attached to my LC-A+. It is a small, robust piece of titanium that looks like a natural part of the camera, and originally designed as a wide-angle lens accessory for digital cameras, you would think that this baby would just decrease the focal length of the camera. But hold it up in front of your eye, and you’ll see that only the center of your view is in focus and the edges have a distinct blur – a blur that the already wide-angle Minitar-1 lens of the LC-A will capture giving your pictures an easily distinguishable “tunnel vision” look.

Tips for the Tunnel Vision Lens

  • With the Tunnel Vision Lens attached the camera will focus differently. Use the 3 m focus for anything between 1.5 m (5 ft) to ∞. And the 1.5 m focus for anything closer.
  • Since only the center will be in focus, remember to put your subject in the center of the shot.
  • It takes time getting to know your tunnel vision lens. The more you use it, the more possibilities you’ll discover.
  • The Tunnel Vision Lens isn’t just for the LC-A. You can use it with any camera – it doesn’t matter if the lens size does not match, just hold it up in front of it. Remember that each lens will give a different effect.

But wait, there is more: The Tunnel Vision Lens is actually two lenses. If you screw off the outer lens barrel the inner small lens (“macro ring”) will work as a macro filter for your camera. And if you thought that the tunnel vision effect gave crazy distorted pictures, just wait till you try this. The macro ring will bend the colors to a crazy level yielding the wildly saturated macro pictures of your hottest dreams.

Tips for the macro ring

  • You should be somewhere around 2-3 cm (approx. 1") from your subject, and the focus set between 0.8-1.5 m.
  • Try it in front of an SLR before trying it out on a camera where you cannot se through the lens. This way you will lern a lot about how close you should be and how to focus, and you won’t waste a roll of film on indistinguishable blurry images.
  • Remember to use fast film or shoot in bright sunshine.

written by larslau

6 comments

  1. stouf

    stouf

    Waaa ! Very complete post ! And two super galleries ! Congrats Lars !

    over 4 years ago · report as spam
  2. breakphreak

    breakphreak

    pretty cool especially about the macro, couldn't figure out the optimal distance so far and couldn't know the exact dependence from distance on LC-A+ lens

    over 4 years ago · report as spam
  3. eggzakly

    eggzakly

    Great review! This is going to be my next piggy-purchase :)

    over 4 years ago · report as spam
  4. tveden

    tveden

    Super review Lars, i gotta get one of those some day.
    Sejt.

    over 4 years ago · report as spam
  5. larslau

    larslau

    Wow... I almost didn't remember writing this post... (:

    over 4 years ago · report as spam
  6. lmuk

    Very useful tips - thanks!
    over 4 years ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: Italiano.