Lomography Embassy Store Puebla, Grand Opening!

Have an account? Login | New to Lomography? Register | Lab | Current Site:

Lomography Embassy Store Puebla, Grand Opening! ended 2 months ago

December 16, 2011 1 comment 1 like

The, long awaited, opening party of the brand new Lomography Embassy Store in Puebla, will be filled with music, analogue lovers and lots of fun!

Hola Amigos! The big day has arrived! The Lomography Embassy Store Puebla is ready to open! Prepare yourself for an all-night-long fiesta! Join us to celebrate the opening of our brand new Mexican Embassy Store.

Located in the beautiful and historic town of Cholula in Puebla, surrounded by pre-hispanic pyramids and a unique ambiance the Lomography Embassy Store Puebla will offer the whole range of Lomographic products to all hungry lomographers in Mexico, who have waited long for this moment to arrive!

A night full of music, lomography and fun awaits all the lomographic community in this grand opening party.
Be sure to join us and don’t forget to keep in touch with us on our facebook page too!

So, where should you go?
Container City No 10
Cholula, Puebla

Remember, the party starts at 20:00!

written by danai

Please login to get more out of this site

You are currently not logged in, do so now to add comments, like articles as well as photos, submit to competitions, translate articles and gain access to unlimited photo upload! If you are not registered yet, go here to find out more about Lomography and join now! If you just want a limited account for now you can use Twitter or Facebook. We would love to have you as a member here!

One person likes this article

Liking articles helps us to present the best ones to you and others. One person likes this article. One person likes this article: sumsi.

1 comment

kidsparty

.Brush the top of negative shape with soapy fluids, oil or possibly Vaseline.<br /> <br /> five.Once again make a strip of cardboard and generate a wall about the negative style.Then dump liquid plaster on the greased mildew.Smooth the top of mixture by having a small part of board.<br /> <br /> 5.Should the mixture includes hardened, eliminate the cardboard outer surface and individual the destructive mold from positive, prying the 2 main casts apart by having a table device.This might be easy should the negative was well greased.Clean this positive well and offer it a coat with shellac to assist you to preserve it all.If you want to label along side it of all the cast, repeat this before shellacking.You'll hang this mold through loop in string

2 months ago · report as spam

Read this article in another language

This is the original article written in: English. It is also available in: Československy.

Lomography