Your Pinhole Ghost

13

How does one photograph themselves to be transparent without doing a double exposure you ask? It's simple! Continue reading and find out how!

Ingredients
Pinhole camera
Some film
Yourself as the model
Light
Tripod

Pre-Flight Check
Think about where you want to set up your self-portrait. It is important to do a little bit of planning. Just a little bit. You need to know where you’re going to put the camera, how long your overall exposure will be, and where you want to be in the shot. Will you be able to use a tripod where you want to shoot or will there be a stable surface for you to place your pinhole camera on? It is a poor ghost self-portrait if you don’t make it into your own shot. Or is it? That is another topic entirely. However, if you’re invisible people won’t be seeing through you. They just won’t SEE you.

Let’s Get Shooting!
Set up your shot and release the shutter. Since you’ve already determined (or guessed) your exposure time, you’re ready to do some math. For the first part of the exposure give it at least 1/4 of the time. *In a 60 second exposure, that’s 15 seconds.

Resist all temptation to touch the camera, close the shutter, or look through the viewfinder (ie. Holga 120PC). You will undoubtedly touch it and cause camera shake. Walk in front of your camera to pose, to smile, or to stand there naked. Whatever. *Do this for the next 1/4 amount of the exposure time; 15 more seconds.

Walk away. Do not touch your camera until you have finished your exposure; remaining *30 seconds. Close the shutter. Develop normally.

Now, EXPERIMENT!
The longer you stay in front of the camera the more solidity you will be on film; less time, less solid.

*Disclaimer: Exposure time varies. This is just a guess on my part. You know your pinhole best and use your own experiences to base your exposure times accordingly.

written by hrh1002 on 2010-11-26 in #gear #tipster #tipster #experimentation #not-a-multiple-exposure #ghosting #film #hrh1002 #tips #how-to #long-exposure #portrait #bulb #tutorial #pinhole #self-portrait

13 Comments

  1. naqi
    naqi ·

    nicely written.good article =)

  2. mochilis
    mochilis ·

    Great! I will surely try it!!

  3. dr_gonzo
    dr_gonzo ·

    www.lomography.de/homes/dr_gonzo/photos/12001029
    I made this almost the same way but i used a completely dark room and flashed two times withe different colour filters

  4. susielomovitz
  5. nina2008
    nina2008 ·

    Ahah love the second with your reflect into the TV screen :)

  6. leela_dark
    leela_dark ·

    That´s cool, I want to try this!

  7. balthazaar
    balthazaar ·

    Maybe you need a cable realease collar if you're doing it by yourself...otherwise how can you keep the shutter open and, in the same time, pose ?
    usd.shop.lomography.com/accessories/diana-cable-release-col…

  8. quail
    quail ·

    this may defeat the purpose of it being a "ghost" but you get a much more solid ghost if you use a remote flash to flash yourself during the exposure while you are in the spot you want to in the photo heres an example www.lomography.de/homes/quail/photos/11988800

  9. mikahsupageek
    mikahsupageek ·

    great photos !

  10. a_lion
    a_lion ·

    great results! now I wish I had a pinhole!

  11. andrewhope
    andrewhope ·

    Need to try this! Did you use the pin hole setting with the lens on or no lens?

  12. yattering
    yattering ·

    I've tried today. Can't wait to see results!

  13. veekkii
    veekkii ·

    One of the most helpful pinhole tipsters! Thanks alot (:

More Interesting Articles