Have an account? Login | New to Lomography? Register | Lab | Current Site:

Comparing Lomo LC-A 2003 and Lomo LC-A+RL 2013

As mentioned in my last blog post, I compared my two LC-As with each other. Here is the result.

First I tried a still life. I put the camera on a tripod and measured the distance between the scene and the camera for correct focusing.

LC-A
LC-A+RL

If you look on the left part of the picture, you might see that the LC-A+ picture is slightly blurred, compared to the one of the LC-A.

I tried it also outside to check if it is an issue with too less light.

LC-A
LC-A+RL

From my point of view, it is the same result, blurred on the left side of the picture.

LC-A
LC-A+RL

You might say, come on, this is Lomo, forget about sharpness. Yes, correct, however, I sometimes do like sharp pictures and I like purposly playing with sharpness. With such a lens, this is not that easy. That’s why I’m complaining.

written by inrod

1 comment

  1. ksears119

    ksears119

    I have a LC-A+ purchased in late 2012 with the same issue, slight blurring on the bottom left side of each frame. My daughter has a LC-A+RL purchased in early 2013 with no problem.

    5 months ago · report as spam